WB-99 Pigments are vibrant to give the most brilliant color matches. When combined with the WB0249 General Purpose Base, prints with extremely soft feel at a low cost on white fabrics. WB0249 General Purpose Base requires longer cure times, up to 3 minutes depending on your dryer configuration. Combine with the WB0248 Quick Cure Base for faster production demands when printing on 100% cotton lights.High performance PVC Free Pigment mixing system for 100% cotton light fabrics or dark fabrics when using the discharge process.Mix thousands of colors using formulas from the OMX Online Ink Mixing software.Offers colors that are compatible with the WB Discharge base and WB Discharge White.

Instructions:

Mix colors using the formulations provided in the OMX Ink Mixing Software. Mixed WB-99 PS colors may be printed from 86-305 mc. in. (34-120 mc. cm.) mesh range. The tack free formulation allows increased coverage; therefore, finer mesh counts may be used for softer hand with minimum loss of color brilliance. Mix colors according to the desired color formula for best results. Note: For better color matches it may be necessary to hold the white out of very dark saturated shades. Colors should be checked through a 156 mc. in. (62 mc. cm.). Colors will be lighter through finer mesh. Recommended Printing Techniques - Image area should be filled with ink. - Leave image area flooded to prevent drying in the screen. - For extended non-printing times, mist with a spray of water to prolong wetness of ink. - Washing the garment is the best test for complete fusion. - WB0100 Fiberblock catalyst will help control Fibrillation when 1-2% is added to the ink PRODUCTS: WB-99 Mixing Primary Colors: WB1141 PS Violet WB2411 PS Blue #1 WB2414 PS Blue #2 WB2415 PS Marine WB3246 PS Green WB4246 PS Yellow WB6367 PS Scarlet WB6364 PS Red WB8037 PS Black C WB9068 PS White WB-99 Fluorescent Colors: WB1142 PS Fl Magenta WB1143 PS Fl Violet WB4247 PS Fl Lemon WB6365 PS Fl Red

Recommendation:

WB-99 pigments will not cure and must be mixed with a base to cure. Stir WB-99 PS prior to weighing. Keep pail closed when not weighing product. WB-99 PS does require "high speed/high shear" mixing to properly disperse the components and additives. We recommend that customers use a shaker mixer, homogenizer, high speed drill with mixing blade, etc. Hand mixing or "turn-about" mixing is not adequate. WB-99 inks require a suitable mixing environment to insure mixed products have no cross contamination with other inks. New or properly cleaned utensils, pumps, pails, etc., are required. Utensils should be cleaned with soap and water.