EnglishRutland Modifiers & Additives
ES NPT Spandesol inks can be printed on Lycra Spandex (Nylon Lycra) to provide good stretch and softness to the design. Colors can be created by... more info
Add NPT Opaque Chino Base as a reducer at any amount to a mixed ink to reduce the viscosity for easier printing or to allow the ink to penetrate the... more info
ES0840 NPT Clear S.H.A.P.E. – ES0840 is used to extend a plastisol ink and to make it print with a softer hand. ES0840 may be mixed in at any... more info
EA0001 NPT FiberBond – Mix NPT Fiberbond at 3% by weight to colors when printing on light cotton garments to reduce fibrillation. Mix 7.5% by... more info
EA0005 NPT Viscosity Reducer – Use EA0005 at 1.0% to 3.0% by weight to reduce the viscosity of thick ink. This product will not cure and should... more info
ES0022 NPT Tack Free Additive - Mix up to 5% NPT Tack Free additive into a NPT ink to reduce the wet ink tack for easier printing and the after tack... more info
Avient™ Specialty Inks FLEXIPUFF ADDITIVE is specifically designed to give a "flexible puff" texture effect. This additive is used to... more info
EA0333 NPT Thickener #3 – EA0333 is a non-phthalate paste thickener that can be used with Rutland’s NPT technology to raise the viscosity... more info
M00004 Liquid Thickener Description M00004 Liquid Thickener mixes into plastisols to raise the viscosity. Higher viscosity inks will normally... more info
M00009 Quick Flash Additive – M00009 is mixed into a plastisol at up to 10% by weight to speed up the flash cure time of the ink. Make sure to... more info
M00023 Flame Retardant Additive – Rutland Flame Retardant Plastisol (Our Standard or Non-phthalate series made by adding 7.5 to 10% of our... more info
NA0005 is a curable thinner which may be added to plastisols for improved printability without altering the chemical (fusion) characteristics. Mix as... more info