Avient™ Specialty Ink INFINITE FX SHIMMERS are a special effect with a fine-medium size metallic flake for a brilliant shimmer effect with a smooth and soft feel. These shimmers are ready-for-use or can be tinted using plastisol colorants for a custom look.

Brilliant metallic shimmer effect with smooth surface 

Stir inks before printing

Use consistent, high-tensioned screen mesh to optimize performance properties

Print in last position or flash after each print if using multiple screens

Print direct to fabric or over a flashed-dried base plate.

Use a suitable underbase when printing on garments prone to bleed

Flash: 220°F (105°C) Cure: 270°F (132°C)

Entire Ink Film Tintable with plastisol colorants.

See Pigment Loading section for suggested tinting percentages. Adjust the % colorant added based on the strength of the colorants and color saturation desired Metallics reflect infrared heat and a forced air dryer is recommended for curing. If using an electric oven, extend dwell time to achieve proper cure

up to 5% Wilflex PC up to 10% Wilflex EQ up to 15% Wilflex RIO / MX up to 10% Rutland C3 Boosters

Can be mixed with other Infinite FX HD bases or clears

For cold-peel transfers, use a coated release paper or polyester film.

Print using 70 duro squeegee and recommended mesh counts followed by adhesive. Gel at 212°F (100°C) for 60 sec.

Apply transfer with heat press at 300°F (150°C) for 10-12 sec at medium pressure.

For transfers on polyester, back with a low bleed white and/or blocker. Verify process.